Stanford Research Systems SIM983 Operation And Service Manual page 39

3.4 Commands
Example:
*IDN?
Example:
*TST?
Example:
*OPC(?)
Example:
CONS(?) z
Example:
SIM983 Scaling Amplifier
*RST
CONS?
1
Identify
Query the device identification string.
The identification string is formatted as:
Stanford Research Systems,SIM983,s/n******,ver#.###
where SIM983 is the model number, ****** is a 6-digit serial number,
and #.### is the firmware revision level.
*IDN?
Stanford Research Systems,SIM983,s/n004900,ver2.0
Self Test
There is no internal self-test in the SIM983 after the power-on, so this
query always returns 0.
*TST?
0
Operation Complete
Sets the OPC flag in the ESR register.
The query form *OPC? writes a 1 into the output queue when com-
plete, but does not a ect the ESR register.
*OPC?
1
Console Mode
Set (query) the console mode to z
CONS causes each character received at the input bu er to be copied
to the output queue.
A reset does not alter CONS. The value in boldface above is the
power-on value. CONS is set to OFF upon Device Clear.
CONS ON
(OFF 0, ON 1) .
3 – 15