Stanford Research Systems SIM983 Operation And Service Manual page 9

General Information
General characteristics
SIM983 Scaling Amplifier
Conditions:
[1] An overload will be detected and the instrument is not guaranteed to
perform properly if these limits are exceeded, or if V
the limits. Continuous application of an input voltage V
of 15 V will damage the instrument.
[2] At 23 C.
[3] Referred to input.
[4] For G 1 For G
noise and o set.
[5] Amphenol 31–10–4052 or similar.
[6] Following an autocalibration at (23 5) C within 24 hours; following
a 2-hour warmup.
[7] To within 0.1% of the final value.
[8] The gain-bandwidth product (GBP) determines the 3 dB bandwidth:
For gain G the bandwidth is GBP G
[9] Tyco 227169–4 or similar.
[10] Non-condensing.
Interface Serial (RS–232) through SIM interface
Connectors BNC (2 front [5], 1 rear [9]); DB–15 (male) SIM interface
Weight 1.5 lbs
Dimensions 1 5 W
1 the specification applies to the output-referred
3 6 H 7 0 D
vii
V exceeds
in ofs
in excess
in