Power-On; Restoring The Default Configuration - Stanford Research Systems SIM983 Operation And Service Manual

1 – 6

1.4 Power-On

1.5 Restoring the Default Configuration
The instrument retains the values of the gain and the o set in non-
volatile memory. Upon power-on, those settings are restored to their
values before the power was turned o .
The power-on configuration of the remote interface is detailed in
Section 3.3.1.
The default configuration of the SIM983 is G
and bandwidth 0 (see Section 2.3.1). This configuration is reached
from the remote interface by issuing the *RST command. To reset
only the gain or the o set to their default values, use button combi-
nations described in Sections 1.2.2 or 1.2.3.
Getting Started
1 00 V 0 000 V
ofs
SIM983 Scaling Amplifier