Maintenance and repair
If the measures described here do not resolve the faults completely, contact your specialist dealer. The specialist
dealer is able to read the exact error codes with a handheld programming device and can perform a targeted sys
tem analysis.
The control unit stores a list of all faults that occur. The specialist dealer reads this information, for example during
a general overhaul of the power wheelchair. Based on the saved data, the specialist dealer determines future ser
vice and maintenance intervals.
9.4.1 Types of notifications
Warning
A warning indicates a status or malfunction of one or several components of the power wheelchair. The function of
components without errors is not restricted.
For example, if the connection between the control unit and seat motor is faulty, this error will only be indicated if
the user attempts to activate the motor. However, the driving function is still available.
Error
An error affects one or several functions of the power wheelchair. The power wheelchair and its functions are not
fully operational until the fault is resolved.
9.4.2 Wheelchair control unit error overview
Display symbol
Error/warning
Controller
warning
Motor temperature warn
ing
Joystick warning
Control panel or input
device fault
Controller fault
Communication
(alternately flashing)
Battery undervoltage
Battery overvoltage
Fault with back adjust
ment motor
Seat tilt motor fault
Seat
motor fault
60
Cause
temperature
Overheating
excessive load
Overheating
excessive load
Joystick not in home posi
tion when the unit is
turned on
Defective control panel or
input device (e.g. joystick)
Defective controller
error
Faulty
between
control device and the
controller;
defective
ware or hardware
Battery deep discharge
Battery cable malfunction
ing/faulty connection to
the battery
Voltage too high (after
complete charging and
driving downhill)
Faulty cabling or plug
connections
Defective actuator
Faulty cabling or plug
connections
Defective actuator
height adjustment
Faulty cabling or plug
connections
Defective actuator
Possible measure
due
to
Cool down phase
due
to
Cool down phase
Move the joystick to the home posi
tion before switching the unit on
Contact specialist dealer
Check all connections
Contact specialist dealer
connection
Check cabling/plug connections
the
hand-held
Contact specialist dealer
cabling,
soft
Charge as soon as possible
Check the connection to the battery
(charge the battery if the connection
is good)
Continue driving slowly
Check cabling/plug connections
Contact specialist dealer
Check cabling/plug connections
Contact specialist dealer
Check cabling/plug connections
Contact specialist dealer
Skippi