Types Of Notifications - Otto Bock B500 Instructions For Use Manual

Maintenance / repair
dealer is able to read the exact error codes with a hand­
held programming device and can perform a targeted sys­
tem analysis.
The control unit stores a list of all faults that occur. The
specialist dealer reads this information, for example during
a general overhaul of the power wheelchair. Based on the
saved data the specialist dealer determines future service
and maintenance intervals.

7.4.1 Types of notifications

Warning
A warning indicates a status or malfunction of one or sever­
al components of the power wheelchair. The function of
components that have no errors is not restricted.
For example, if the connection between the control unit and
seat motor is faulty, this error will only be indicated if the
user attempts to activate the motor. However, the driving
function is still available.
Fault
A fault impairs one or several functions of the power wheel­
chair. The power wheelchair and its functions are not fully
operational until the fault is resolved.
Page 74 03/2011 B500 online/e-europe