Valve
Spring
Figure 8-24. Rubber Valve and Spring Removed
from Cup.
2. Remove the screw securing the oil fi lter adapter
and individual O-rings to the crankcase, then
carefully separate the parts. See Figure 8-25.
Adapter
Figure 8-25. Removing Oil Filter Housing Adapter.
Remove Ignition Modules
1. Rotate the fl ywheel so the magnet is away from
the modules.
2. Remove the mounting screws and disconnect
the kill lead from the ignition modules. Note the
position of ignition modules. See Figure 8-26.
Cup
Figure 8-26. Removing Ignition Modules.
Remove Grass Screen and Cooling Fan
Adapter
Mounting
Mounting
Mounting
Screw
Screw
Screw
Figure 8-27. Removing Grass Screen Fasteners.
Figure 8-28. Removing Mounting Studs.
Ignition
Modules
1. Remove the screws, att aching hardware and hex
studs securing the grass screen, stiff eners and
cooling fan to the fl ywheel. See Figures 8-27, 8-28
and 8-29.
Section 8
Disassembly
8
8.7