Kohler Comand Pro CH1000 Service Manual page 44

Section 5
Fuel System and Governor
Figure 5-33. Installing Choke Assembly
Components.
11. Place a drop of Loctite
of each new screw. Position and install the
new choke plate to the fl at side of the choke
shaft . Start the two screws. Close the choke and
check the plate alignment within the carburetor
throat, then tighten the screws securely. Do not
overtighten. See Figure 5-34.
Figure 5-34. Installing Choke Plate.
12. Check for proper operation and free movement of
the parts. Install the new cap.
Always use new gaskets when servicing or
reinstalling carburetors. Repair kits are available
which include new gaskets and other components.
Service/repair kits available for Keihin BK two-barrel
carburetors and affi liated components are:
Carburetor Overhaul Kit
Float Kit
Fuel Solenoid Kit
Bowl Kit
High Altitude Kit (1219-2434 m/4,000-8,000 ft .)
5.14
®
222MS™ on the threads