Komatsu PW130ES-6K Operation & Maintenance Manual page 65

EXPLANATION OF COMPONENTS OPERATION
D: METER DISPLAY PORTION
AD324240A
PILOT DISPLAY
When the starting switch is ON, the pilot display lights up when
the display items are functioning.
1. ENGINE PRE-HEATING MONITOR
This monitor lamp indicates the pre-heating time required when
starting the engine at an ambient temperature below 0°C.
The monitor lamp lights when the starting switch is turned to
HEAT position and flashes after about 30 seconds to show that
the pre-heating is completed. (The monitor lamp will go off after
about 10 seconds.)
AD313430A
2. SWING LOCK MONITOR
This informs the operator that the swing lock is being actuated.
Actuated: Lights up
When the swing lock switch is turned ON (ACTUATED), the mon-
itor lamp lights up.
When the swing lock override switch is turned on, this monitor
lamp flashes.
64