Handling The Accumulator - Komatsu PW130ES-6K Operation & Maintenance Manual

OPERATION
Do not drive machine with low brake pressure warning lamp
illuminated.
4. MAIN BEAM WARNING LAMP
This lamp will illuminate when road lights main beam is switched
on.

HANDLING THE ACCUMULATOR

After stopping the engine, always place the control lever pad
safety lock in the LOCK position and lock the attachment
control pedal with the lock pin.
The accumulators are filled with high-pressure nitrogen gas,
and it is extremely dangerous if they are handled in the
wrong way.
Always observe the following precautions.
Never make any hole in the accumulators or expose them
G
to flame or fire.
Do not weld any boss to the accumulators.
G
When disposing of the accumulators, it is necessary to
G
re lease the gas from the accumulators, so please con-
tact your Komatsu distributor.
Brake circuit accumulators
This machine is equipped with the accumulator in the brake cir-
cuits.
CAUTION
WARNING
EXPLANATION OF COMPONENTS
99