Starting Engine - Komatsu PW130ES-6K Operation & Maintenance Manual

OPERATION
Replacement monitor of engine oil (15)
G
If the monitors or gauges do not light up or the buzzer does not
sound, there is probably a broken bulb or disconnection in the
monitor wiring, so contact your Komatsu distributor for repairs.
After approx. 3 sec., the following gauges will remain on and the
other monitors will go out.
Engine water temperature gauge (10)
G
Fuel gauge (11)
G
(2) Press lamp switch (14) to turn on the work lamps.
A warning lamp on the steering column will illuminate.
If the lamps do not light up, there is probably a broken bulb or dis-
connection in the wiring, so contact your Komatsu distributor for
repairs.
It is illegal to travel on the road in certain countries with rear-
ward facing worklights illuminated.

STARTING ENGINE

NORMAL STARTING
Check that there are no persons or obstacles in the sur-
rounding area, then sound the horn and start the engine.
NOTICE
Do not keep the starting motor rotating continuously for
more than 20 seconds.
If the engine will not start, wait for at least 2 minutes before
trying to start the engine again.
110
CAUTION
WARNING
OPERATION