Check Oil Level In Axles, Add Oil - Komatsu PW130ES-6K Operation & Maintenance Manual

SERVICE PROCEDURE

CHECK OIL LEVEL IN AXLES, ADD OIL

1. Ensure axle is horizontal and remove plug (1).
2. If no oil emerges attach tube and funnel and add oil until oil
emerges from the hole after removing tube.
3. Replace plug (1).
For details of the oil to use, see "USE FUEL, COOLANT
AND LUBRICANTS ACCORDING TO AMBIENT TEMPER-
ATURE" on page 173.
CHECK OIL LEVEL IN TRANSMISSION, ADD OIL
1. Remove level plug (2).
2. If oil emerges replace plug (2)
3. If no oil emerges remove plug (1) and add oil until oil emerges
from plug hole (2).
4. Replace plugs.
For details of the oil to use, see "USE FUEL, COOLANT
AND LUBRICANTS ACCORDING TO AMBIENT TEMPER-
ATURE" on page 173.
210
MAINTENANCE.