After Storage; Starting Machine After Long-Term Storage - Komatsu PW130ES-6K Operation & Maintenance Manual

LONG-TERM STORAGE

AFTER STORAGE

NOTICE
If the machine is stored without carrying out the monthly
rust prevention operation, request your Komatsu distributor
for service.
Carry out the following procedure when taking the machine out of
long-term storage.
Wipe off the grease from the hydraulic cylinder rods.
G
Add oil and grease to all places.
G

STARTING MACHINE AFTER LONG-TERM STORAGE

When starting the machine after a long-term storage, first cancel
the automatic warming-up function as follows.
1. Turn the starting switch key to the ON position.
2. Turn the fuel control dial from the low idling (MIN) position to
the full (MAX) position, hold it there for 3 seconds, then return
it to the low idling (MIN) position and start the engine.
154
OPERATION