Komatsu PW130ES-6K Operation & Maintenance Manual page 110

OPERATION
OPERATIONS AND CHECKS BEFORE STARTING
ENGINE
If the control lever is touched by accident, the work equip-
ment or the machine may move suddenly. When leaving the
operator's compartment, always set the control lever pad
safety lock lever securely to the LOCK position.
1. Check that control lever pad safety lock (1) is at the LOCK
position.
2. Check the position of each lever.
Set the control lever to the neutral position.
When starting the engine, never touch the knob button.
3. Insert the key in starting switch (2), turn the key to the ON
position, then carry out the following checks.
The buzzer will sound for approx. 1 sec., and the following moni-
tors and gauges will light up for approx. 3 sec.
Radiator water level monitor (3)
G
Engine oil level monitor (4)
G
Hydraulic oil level monitor (5)
G
Charge level monitor (6)
G
Fuel level monitor (7)
G
Engine water temperature monitor (8)
G
Engine oil pressure monitor (9)
G
Engine water temperature gauge (10)
G
Fuel gauge (11)
G
Engine pre-heating monitor (12)
G
Air cleaner clogging monitor (13)
G
Swing lock monitor (14)
G
WARNING
HEAT OFF
ON
START
AM090710A
OPERATION
AD313610A
109