STATUS
6.3.3 RxGOOSE boolean inputs
ACTUAL VALUES STATUS RxGOOSE BOOLEANS
RxGOOSE BOOLEANS
The B90 is provided with optional IEC 61850 capability. This feature is specified as a software option at the time
of ordering. See the Order Codes section of chapter 2 for details.
6.3.4 RxGOOSE DPS inputs
ACTUAL VALUES STATUS RxGOOSE DPS
RxGOOSE DPS
The B90 is provided with optional IEC 61850 capability. This feature is specified as a software option at the time
of ordering. See the Order Codes section of chapter 2 for details.
6.3.5 Contact outputs
6
ACTUAL VALUES STATUS CONTACT OUTPUTS
CONTACT OUTPUTS
The present state of the contact outputs is shown here. The first line of a message display indicates the ID of the contact
output. For example, 'Cont Op 1' refers to the contact output in terms of the default name-array index. The second line of
the display indicates the logic state of the contact output.
For form-A contact outputs, the state of the voltage and current detectors is displayed as Off, VOff, IOff, On, IOn, and VOn.
For form-C contact outputs, the state is displayed as Off or On.
6.3.6 Virtual outputs
ACTUAL VALUES STATUS VIRTUAL OUTPUTS
VIRTUAL OUTPUTS
6-4
RxGOOSE BOOLEAN 1
STATUS: Off
RxGOOSE BOOLEAN 256
STATUS: Off
RxGOOSE DPS 1
Status: Intermediate
RxGOOSE DPS 16
Status: Intermediate
Cont Op 1
Off
Cont Op xx
Off
Virt Op 1
Off
Virt Op 96
Off
B90 LOW IMPEDANCE BUS DIFFERENTIAL SYSTEM – INSTRUCTION MANUAL
CHAPTER 6: ACTUAL VALUES
Range: On, Off
Range: On, Off
Range: On, Off, Intermediate, Bad
Range: On, Off, Intermediate, Bad
Range: On, Off, VOff, VOn, IOn, IOff
Range: On, Off, VOff, VOn, IOn, IOff
Range: On, Off
Range: On, Off