GE B90 Instruction Manual page 87
Low impedance bus differential
system
Hide thumbs
Also See for B90:
- Instruction manual (510 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (474 pages)
Table of Contents
Advertisement
CHAPTER 3: INSTALLATION
2.
Right-click the Local Area Connection icon and select Properties.
3.
Select the Internet Protocol (TCP/IP) item from the list, and click the Properties button.
4.
Click the "Use the following IP address" box.
5.
Enter an IP address with the first three numbers the same as the IP address of the B90 relay and the last number
different (in this example, 1.1.1.2).
6.
Enter a subnet mask equal to the one set in the B90 (in this example, 255.0.0.0).
7.
Click the OK button to save the values.
B90 LOW IMPEDANCE BUS DIFFERENTIAL SYSTEM – INSTRUCTION MANUAL
ADD DEVICE TO SOFTWARE
3-47
3
Advertisement
Table of Contents
