CHAPTER 5: SETTINGS
Configuring a composite curve with an increase in operating time at increased pickup multiples is not allowed. If
this is attempted, the EnerVista software generates an error message and discards the proposed changes.
5.4.3.5 Standard recloser curves
The following graphs display standard recloser curves available for the B90.
B90 LOW IMPEDANCE BUS DIFFERENTIAL SYSTEM – INSTRUCTION MANUAL
Figure 5-54: Composite recloser curve with HCT enabled
Figure 5-55: Recloser curves GE101 to GE106
SYSTEM SETUP
5
5-117