Lubrication Points - Kubota KX 016-4 Operator's Manual

BLubrication Points
To avoid personal injury:
A First lower all attachments to the ground then
stop the engine and remove the key.
A While greasing, take caution not to step on the
bucket teeth.
A When
doing excavation
generously grease the following points. After
ending work, grease again.
Grease the marked grease nipples shown by arrows in the
illustration below.
1. Boom bottom linkage............................. 1 place
2. Arm bottom linkage................................ 1 place
3. Bucket link pin........................................ 3 places
4. Boom cylinder boss............................... 2 places
5. Arm cylinder boss.................................. 2 places
6. Bucket cylinder boss.............................. 1 place
7. Fixing pin between arm and bucket........ 1 place
8. Swing cylinder boss............................... 1 place
9. Swing cylinder bottom............................ 1 place
10. Swing pin............................................... 2 places
11. Dozer cylinder boss (or pin)................... 2 places
12. Dozer linkage pin................................... 2 places
work in water,
MAINTENANCE 43