Kubota KX 016-4 Operator's Manual page 39

[KX016-4]
(1) Weight indicator
(2) Lever
(3) Backrest adjustment lever
(4) Horizontal seat adjustment lever
C Horizontal seat adjustment (seat stand-off)
Pull the horizontal seat adjustment lever up and move the
seat to the desired position by moving it forward or back,
then release the lever.
A Check that the seat is locked into place.
C Spring adjustment (driver's weight)
1. The seat can be set to the weight of the driver with the
lever. The weight indicator is provided as an
adjustment aid.
2. Pressing down the lever increases the spring tension
(suitable for heavier operators), pulling the lever
upward reduces spring tension (for lighter operators).
3. Adjust the seat so that a comfortable cushioning is
achieved.
C Backrest adjustment
Take the load off the backrest and pull up the backrest
adjustment lever. Set the backrest to the desired sitting
position and release the lever. The backrest should be
adjusted so that the operator can safely operate the
control levers with the back resting completely on the
backrest.
EXCAVATOR OPERATION
[KX018-4]
(1) Backrest adjustment lever
(2) Weight indicator
(3) Spring adjustment grip
(4) Horizontal seat adjustment lever
C Horizontal seat adjustment (seat stand-off)
Pull the horizontal seat adjustment lever up and move the
seat to the desired position by moving it forward or back,
then release the lever.
A Check that the seat is locked into place.
C Spring adjustment (driver's weight)
1. The seat can be set to the weight of the driver with the
lever. A weight indicator is provided as an adjustment
aid.
2. Sit down on the driver's seat.
3. Swing out spring adjustment grip by 90 degrees.
4. Use up and down pumping movements to change the
spring tension until your own body weight is shown in
the weight display.
A Adjust the seat until the marker arrow is in the centre
of the weight display.
C Backrest adjustment
Take the load off the backrest and pull up the backrest
adjustment lever. Set the backrest of the desired sitting
position and release the lever. The backrest should be
adjusted so that the operator can safely operate the
control levers with the back resting completely on the
backrest.
17