Kubota KX 016-4 Operator's Manual page 56

34 LIFTING OF THE EXCAVATOR
3. Tackle
The weights of the excavators and the recommended
tackle for lifting these loads are mentioned in the
following table. Choose components having enough
strength.
Excavator Weight* [KX016-4]
Excavator Weight* [KX018-4]
Load / Cable
Minimum Cable Diameter
(Safety factor=6)
*Excavator Weight: With long arm.
Steel cable: 6 x 24
4. Lifting
(1) Lift slowly and safely.
(2) Do not enter the excavator area when lifting.
Maximum strength
for example : (JIS G 35 25) - "6 x24"
Diameter zinc-plated
45.8 kN
10 mm (3/8)
(4670 kgf)
71.5 kN
12.5 mm (1/2)
(7290 kgf)
89.7 kN
14 mm (9/16)
(9146 kgf)
117 kN
16 mm (5/8)
(11930 kgf)
148 kN
18 mm (45/64)
(15091 kgf)
Canopy : 1490 kg
Canopy : 1620 kg
6400 N (652 kgf)
10 mm or more
not zinc-plated
49.3 kN
(5027 kgf)
77 kN
(7851 kgf)
96.6 kN
(9850 kgf)
126 kN
(12848 kgf)
160 kN
(16315 kgf)
1. Boom side
Hook in the steel cable with a shackle into the lifting
hole.
(1) Steel cable
(2) Shackle
2. Dozer side
Hook in the steel cable with a shackle into the lifting
hole around the canopy.
(1) Steel cable
(2) Shackle