Kubota KX 016-4 Operator's Manual page 11

12. Do not wear baggy, torn or oversized clothing when
working with the excavator as such clothing can get
caught in rotating parts or control elements which can
cause accidents or injuries. Wear adequate safety
clothing, e.g. safety helmet, safety shoes, eye
protection, ear protection, working gloves, etc., as
necessary and as prescribed by law or statutes.
(1) Helmet
(2) Clothing fit for work
(3) Tight seams
(4) Good grip footwear
(5) Well fitting cuffs
(6) Working gloves
13. Do not allow passengers to ride on any part of the
excavator at anytime. The operator must remain in the
excavator seat during operation.
14. Check levers, pedals and all mechanical parts for
correct adjustment and wear. Replace worn or
damaged parts immediately. Check nuts and bolts
regularly for correct torque.
15. Keep your excavator clean. Heavy soiling, grease,
dust and grass can cause fires, accidents or injuries.
16. Use only KUBOTA authorized attachments.
17. Before starting the excavator, be confirm that the
excavator has been filled with fuel, lubricated, greased
and undergone any required maintenance work.
18. Do not modify the excavator; modifications could lead
to unforeseen safety problems.
19. Make sure attachments, particularly those utilizing
quick attach systems, are securely mounted.
20. Install protective guards on the excavator when
working in areas where objects may fall or be thrown.
(7) Straw hat
(8) Towel
(9) Baggy trousers
(10) Loose cuffs of the shirt
(11) Baggy shirt
(12) Rubber sandals
2. OPERATING THE EXCAVATOR
1. Mount and dismount of the machine safely. Always
face the machine. Always use handrails and available
steps and keep yourself well balanced. Do not grab or
hold any of the control levers and switches. Do not
jump on or off the machine, whether stationary or in
motion.
2. Start and control the excavator only from the
operator's seat. The driver should not lean out of his
seat when the engine is running.
3. Before starting the engine, make sure that the lock
levers are in the "Lock" position and all control levers
and pedals are in their neutral positions and the seat
belt is fastened correctly.
4. Before operating the excavator, make sure that the
dozer blade is in front of you. If the levers are activated
with the dozer blade at the rear, the tracks will move in
the opposite direction of the drive levers.
5. Do not operate or idle engine in a non-ventilated area.
Carbon monoxide gas is colorless, odorless, and
deadly.
6. Keep all safety equipment and covers in place.
Replace damaged or missing safety devices.
SAFE OPERATION 3