Greasing Swing Ball Bearing; Checking Fuel Line And Intake Air Line; Every 250 Service Hours; Changing Engine Oil(First Engine Oil Change After 50 Service Hours) - Kubota KX 016-4 Operator's Manual

48 REGULAR CHECKS AND MAINTENANCE WORK
A If the air suction is still inadequate, or the color of the
exhaust gases is abnormal even after the cleaning, the
air filter cartridge must be replaced.
BGreasing Swing Ball Bearing
1. Fill with grease through the respective grease nipple.
2. Grease at each 90 (1.58 rad.) position of the swing
frame.
(1) Grease nipple
BChecking Fuel Line and Intake Air Line
1. Check to see that all lines and hose clamps are
tightened and not damaged.
2. If hoses and clamps are found worn or damaged,
replace or repair them at once.

EVERY 250 SERVICE HOURS

Do all 50 hour servicing at the same time.
BChanging Engine Oil(First Engine Oil
Change after 50 Service Hours)
To avoid personal injury:
A First stop the engine then remove the key and
wait long enough for the oil to cool down.
1. Remove the drain plug on the underside of the engine
and drain all oil.
2. Re-tighten the drain plug.
(1) Drain plug
3. Fill through the filling port up the specified level.
(1) Oil filling port