Kubota KX 016-4 Operator's Manual page 54

32 TRANSPORTING THE EXCAVATOR ON A VEHICLE
2. Use mounting brackets to secure the ramp properly.
Connect the ramps directly to the bed.
3. For additional safety, use blocks or supports under the
ramps and the bed.
4. Align the ramps and the tracks and then drive the
excavator slowly up the ramps. After ensuring that the
tracks are completely on the bed, swing the upper
body around to the back of the vehicle.
(A) 4 x H or more
5. Block the tracks and cable down the excavator with
suitable chains and
appropriate state regulation).
(1) Chain
(2) Block
(1) Chain
Rated capacity at the tie down points
6. Before unloading, raise the dozer and bucket from the
bed.
approved method (check
1680 N
(171 kg)