Using The Mounting Bracket; Microphone Connection - Icom ID-880H Instruction Manual

QUICK REFERENCE GUIDE
D Using the mounting bracket
q Drill 4 holes where the mounting bracket is to be installed.
• Approx. 5.5–6 mm (
when using self-tapping screws.
w Insert the supplied screws, nuts and washers through the
mounting bracket and tighten.
e Adjust the angle for your suitable position.
Nut
Spring washer
Mounting
bracket
When using
self-tapping
screws
25°
III
") when using nuts; approx. 2–3 mm (
1 ⁄
4
Flat washer
Mounting nut
D Microphone connection
A microphone connector is available on the main unit front
panel. Connect the supplied microphone connector as illus-
")
1 ⁄
8
trated below.
Transceiver
Microphone