Basic Operation; Setting A Frequency - Icom iC-A14 Instruction Manual

■

Setting a frequency

D Using the [Y]/[Z] keys
q Rotate [VOL] to turn ON power, then push [CLR] to select
the frequency mode if a memory CH number or WX CH
number appears on the function display.
w Push [Y]/[Z] to set the desired frequency.
- For the IC-A14 only -
• 1 MHz tuning step is selectable. Push [FUNC] , then
push [Y]/[Z]. Push [FUNC] again to return to normal
tuning.
D Using keypad
(IC-A14 only)
q Rotate [VOL] to turn ON power, then push [CLR] to select
the frequency mode if a memory CH number or WX CH
number appears on the function display.
w Push 5 appropriate digit keys to input the frequency.
• Push [1] as the 1st digit.
• When a wrong digit is input, push [CLR] to clear, then repeat
step w again.
• Push [ENT] to enter consecutive zero digits.
• Only [2], [5], [7] or [0] can be entered as the 5th and fi nal digit.
[EXAMPLE]
• 111.225 MHz: Push [1], [1], [1], [2], [2]
• 117.250 MHz: Push [1], [1], [7], [2], [5]
• 120.000 MHz: Push [1], [2], [ENT]
• 125.300 MHz: Push [1], [2], [5], [3], [ENT]

BASIC OPERATION

[VOL]
[Y]
[Z]
[ENT]
3
[CLR]
Keypad
[FUNC]
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
8