Tag" Channel Setting - Icom iC-A14 Instruction Manual

■

"TAG" channel setting

Memory and weather channels* can be specified to be
skipped for the memory and weather channel* scans respec-
tively. The "TAG" channel function is only selectable in the
scan mode.
The " " icon appears with
the scanned channel.
For the IC-A14
q Push [MR] to select the memory mode; or, push [FUNC],
then push [WX](7) to select a weather channel.
• Select the desired BANK, if desired.
w Select the desired memory/weather channel to be a "TAG"
channel.
• Select the desired BANK, if desired.
e Push [FUNC] , then push [TAG](9) to set a "TAG."
• "TAG" appears.
• Non-"TAG" channels are skipped during scan.
r To cancel the "TAG" setting, repeat above steps.
*For the IC-A14 only
No " " icon appears with
the skipped channel.
For the IC-A14S
q Push [MR] to select the memory mode.
w Select the desired memory channel to be a "TAG" chan-
nel.
e Hold down [LIGHT] for 2 seconds to set a "TAG."
r To cancel the "TAG" setting, repeat the above steps.
SCAN OPERATION
5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20