Gobos; Gobos And Lamp - Elumen8 ELUM021 User Manual

4. DMX input/output:
For DMX 512 operation, use 3/5-pin XLR cables to link the units together
5. Power Cable:
Connection to the incoming power supply.
6. Fuse (T 10A):
Protects the unit from over voltage or short circuit
7. Power Switch: Turns the power On/Off
4. Gobo and Lamp

4.1 Gobos

GOBO WHEEL 1 GOBO WHEEL 2
CAUTION: Never unscrew the screws of the rotating gobo as the ball bearing will come to pieces.
C
Install the gobos with the unit switched off.
Unplug from the mains before changing the gobos!
DANGER!
7C