How To Set The Unit; Main Functions - Elumen8 ELUM021 User Manual

5. How To Set The Unit
5.1 Main Function
To select any of the given functions, press the MENU button up to where the required one is showing
on the display. Select the function by pressing the ENTER button and the display will blink. Use the UP
and DOWN buttons to change the mode. Once the required mode has been selected, press the ENTER
button to setup. To go back to the functions without any changes press the MENU button again. Hold
the MENU button for one second or wait for one minute to exit the menu mode.
The main functions are shown overleaf:
C 10C