Table of Contents
Advertisement
The minimum distance between the light output lens and the illuminated surface must be more
—
than 12 meters.
Disconnect mains power before fuse/lamp replacement or servicing.
—
Replace fuse/lamp only with the same type.
—
In the event of a serious operating problem, stop using the unit immediately.
—
Never turn the unit on and off in short intervals.
—
The housing, lenses, or the ultraviolet filter must be replaced if they are visibly damaged.
—
DO NOT open the unit as there are no user serviceable parts inside.
—
Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to
—
damage or malfunction. Please contact the nearest authorized technical assistance center if
needed.
Disconnect the mains power if the fixture is not being used for a long period of time.
—
Use the original packing materials for transportation.
—
Cautions:
To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture.
—
Hot lamp explosion hazard. DO NOT open the unit within 15 minutes after switching off.
—
Replace the lamp once it is damaged, deformed or past its expiry hours.
—
DO NOT look directly at the unit while the lamp is on.
—
Never touch the lamp with bare fingers.
—
DO NOT start the unit without the lamp enclosure or when housing is damaged.
—
2. Technical Specifications
Power supply
- AC 100~240V 50/60Hz
Power Consumption
- 510W
Fuse
- T 10A
Light Source
- PHILIPS MSD Platinum 16R 330W
Battery backup display
C
3C
Advertisement
Table of Contents
