Table of Contents
Advertisement
TV, so you can control TV volume while in the AUX, DVD,
TV or MTS mode. You can perform Individual Volume
Unlock on a selected device to set its volume control for
independent operation.
NOTE:
The audio mode's (AUD) volume controls are
active regardless of Volume Lock settings.
However, if you lock the volume controls to
the AUD mode, you will have control of the
audio device's volume in all other modes (i.e.,
AUX, DVD, TV, and MTS). This can be an advan-
tage if, for example, you always listen to home
entertainment devices through your receiver's
speakers.
Unlocking Volume Control for a Single Device
(Individual Volume Unlock)
1.
Assuming Global Volume Lock is active, select
a mode on the remote control that you want to
unlock (e.g., MTS) and press it once. Next,
press and hold SETUP until the device key
blinks twice.
2.
Enter 9 9 3. The last-selected device key
blinks twice.
Press VOL- once. The last-selected device key
3.
blinks four times.
4.
Repeat steps 1 through 3 for each device you
want volume to be unlocked.
Now, after you select a device that has volume unlocked
(e.g., MTS), pressing VOL+, VOL-, or MUTE, controls only
that device's volume.
Unlocking All Volume Control (Global Volume Unlock)
NOTE:
Performing these instructions sets indepen-
dent volume control for all programmed
devices.
On the remote control, press and hold SETUP
1.
until the last-selected device key blinks twice.
Enter 9 9 3. The last-selected device key
2.
blinks twice.
3.
Press VOL+ once. The last-selected device key
blinks four times.
16
Advertisement
Table of Contents
