Universal Electronics NEVO PORTAL Quick Start Manual

NEVO® PORTAL QUICKSTART GUIDE
Power
Pause
Volume Up
VOL
Volume Down
Mute
©Copyright Universal Electronics 2014
INSTRUCTIONS
Step1
Download Nevo Application
1. Turn on tablet or smartphone.
2. Go to the Google™play or App Store
3. Download "Nevo" application.
Tip:
While Nevo application is downloading to your
tablet or smartphone, take that time to setup and turn
on Nevo Portal hub.
TROUBLESHOOTING
Nevo Portal will not pair with my tablet or phone
Ensure that the Nevo Portal unit has good working batteries. Ensure
that Bluetooth communication is active on your smart device and that
the Nevo application is running. Ensure that the smart device that
you are using is compatible with Nevo Portal by checking the list of
compatible devices on WWW.URCSUPPORT.COM/NEVO.
The Nevo Portal is paired, but it still does not control my
equipment when using the smart device
Ensure that the blue ring on the Nevo Portal lights up whenever a
Play/Resume
control key is pressed on your smart device. Ensure that the Nevo
Portal has clear line-of-sight to all of your home theater equipment.
Ensure that none of your devices are currently set to RF-CONTROL,
Channel Up
which commonly causes the device to ignore IR control which the
Nevo Portal requires.
My service provider is not listed as one of the options in the
CH
in-app program guide
Go to WWW.TVGUIDE.COM and see if you can set the guide listing
for your service provider. If you cannot, then that provider is not
supported by the Nevo application.
Channel Down
Nothing is listed in the in-app program guide
Fav/Last Channel
Verify that your internet connection is receiving and transmitting
information. Internet connection is required to run the program guide
in the Nevo application.
Step2
Install Batteries
Insert 2 AA batteries (alkaline
application.
℠
is recommended). Match the
+ and – marks.
Step3
Pairing with Nevo Portal
1. Turn on Bluetooth capabilities on tablet or smartphone.
2. On tablet or smartphone, select and open the Nevo
application.
3. Follow the pairing wizard in the Nevo application.
Tip:
If Bluetooth symbol
is not lit up on tablet or
smart device, Nevo Portal
hub is not paired.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the
user is encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit di erent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
The user is cautioned that changes and modi cations made to the equipment without the
approval of manufacturer could void the user's authority to operate this equipment.
For Industry Canada
Industry Canada statement
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
For additional support on pairing, please visit us at:
WWW.URCSUPPORT.COM/NEVO
Step4
Setup the Nevo Application
for Your Home Theater
1. Assign a room name and add your home theater
equipment to the Nevo application.
2. Edit the Nevo Portal key assignments so the keys
control your equipment as desired.
3. Select the in-app program GUIDE, enter your zip
code, select your service provider, and customize the
guide as desired.
MUG8100SF A04