Programming A Learned Key - Universal Electronics OCAP 5 User Manual

• Learning capacity is approximately 16 to 25 keys,
depending on the code being learned.
• Certain device functions are not learnable including
multi-frequency types, some high frequency ones,
and other unusual formats.
• For optimum learning, avoid high levels of ambient
light such as natural sunlight or energy-efficient
fluorescent lights.
Please have your original remote controls
NOTE:
handy before programming learning.

Programming a Learned Key

NOTE: If more than 15 seconds pass between key
presses, the remote exits programming.
Press and hold SETUP until the last-selected
1.
mode key blinks twice, then press 9 7 5.
NOTE:
If the LED displays one long flash instead,
either your batteries are low, or the Atlas
OCAP 5-Device Remote Control with Learn-
ing has a memory fault.
Press a mode key once (i.e., VCR, DVD, AUD,
2.
TV, or CBL) to assign a mode for learning.
3. Then press the key on your Atlas OCAP
Remote Control that learns the new code.
4. Place the Atlas OCAP 5-Device Remote
Control with Learning head-to-head (about 2"
apart) from your original remote control. Also
locate the key (on your original remote
control) that you want the Atlas OCAP 5-
Device Remote Control with Learning to
learn.
5. On the original remote, press and hold the key
to be learned. The Atlas OCAP 5-Device
Remote Control with Learning's LED will
blink rapidly, then turn off. Continue holding
www.urcsupport.com/atlasocap
2"
15