Media Stream Configuration - Bolin Technology EX1030BHD-L5NA User Manual

Media Stream Configuration

NOTE:
•
This function may vary with models, please see the actual Web interface for details.
Media Stream
You can display the established media streams from a camera. You may also set the camera so it transmits code streams
by the UDP or TCP protocol to a specified IP address and port number. The settings can be saved and take effect after
the camera is restarted.
1. Click Setup > Video & Audio > Media Stream.
2. Click +, select a stream type, and then set the IP address and port
number of the unicast or multicast group for the decoding device that
receives audio and video streams from the camera.
If you want the device to establish the media stream that has been
configured before automatically after the restart, select Yes for
Persistent.
3. To delete a stream, click
4. Click Submit to complete the operations.
RTSP URL are as following:
•
Main Steam:
•
Sub:
•
Third:
Note: We recommend that you can use VCL or FFMPEG Media Player as they will often be faster and include audio
support.
RTSP Multicast Address
After an RTSP multicast address is configured, the third-party player can request the RTSP multicast media stream from the
camera through the RTP protocol.
1. Click Setup > Video & Audio > Media Stream > RTSP
Multicast Address.
2. Set the multicast address (224.0.0.0 to 239.255.255.255) and
port number (0 to 65535).
3. Click Save.
.
rtsp://username:password@IP:port/media/video1
rtsp://username:password@IP:port/media/video2
rtsp://username:password@IP:port/media/video3
36