Image Enhancement - Bolin Technology EX1030BHD-L5NA User Manual

NOTE:
•
If Auto Switching is enabled (scene settings will be unavailable), the device will switch between the set scenes. If not,
the device will stay at the current scene. The device will stay at default scenes unless the non-default scenes are
triggered.
•
If multiple non-default scenes are triggered, then the device will switch to the scene with the minimum
•
Number (starts from 1 to 5).

Image Enhancement

NOTE:
•
This function is not supported by some models, please see the actual model for details.
1. Click Setup > Image > Image and then click Image
Enhancement.
2. Use the sliders to change the settings. You may also enter values
directly. The following table describes some major parameters.
A. Brightness
a. Set the degree of brightness of images.
B. Saturation
a. The amount of a hue contained in a color.
C. Contrast
a. Set the degree of difference between the blackest pixel and the whitest pixel.
D. Hue
a. Overall tendency of colors in an image.
E. Sharpness
a. Contrast of boundaries of objects in an image.
F. 2D Noise Reduction
a. Reduce the noise of images. The function may cause image blurring.
G. 3D Noise Reduction
a. Reduce the noise of images. The function may
cause motion blur (or ghosting in some
applications).
H. Image Rotation
a. Rotation of the image
3. To restore default settings in this area, click Default.
Exposure
NOTE:
•
This function is not supported by some models, please see the actual model for details.
•
The default settings are used for common scenes. Keep the default settings unless a particular scene is required.
1. Click Setup > Image > Image and then click Exposure.
2. Set the parameters as required. The following table describes some major parameters.
A. Shutter (s)
a. Shutter is used to control the light that comes into the lens. A fast shutter speed is ideal for scenes in
27