Corners - Digital Projection HIGHlite Laser II 3D Series User Manual

Digital Projection HIGHlite Laser II 3D Series
Geometry menu continued from previous page

4 Corners

For each corner, apply horizontal and / or vertical correction as necessary to restore the
rectangular shape of the image.
Top Right Corner example
In this illustration, the top right corner requires both horizontal and vertical correction.
Top Right Corner
Operating Guide
correction
USING THE PROJECTOR

4 Corners

Top Left Corner
Top Right Corner
Bottom Left Corner
Bottom Right Corner
Reset
Top Right Corner Adjustment
Top Right Corner x
Top Right Corner y
Corner corrections provide a simple
u setup for awkward installations and
irregular shaped screens that may
u
distort the image. To apply a similar
u
(but less flexible) correction, while
u preserving the original aspect ratio
of the image, use the
menu.
Some settings may be unavailable
depending on other settings. For
more information, see
Combinations Of Settings
in this guide.
t u
0
p q
0
Notes
Keystone
Possible
further
Rev B December 2016
page 54