Parameter Write Inhibit - Mitsubishi Electric MR-J3-B-RJ006 Instruction Manual

5. PARAMETERS

5.1.2 Parameter write inhibit

No. Symbol
PA19 *BLK Parameter write inhibit
In the factory setting, this servo amplifier allows changes to the basic setting parameter, gain/filter parameter,
extension setting parameter, I/O setting parameter and extension control parameter settings. With the setting
of parameter No.PA19, write can be disabled to prevent accidental changes.
The following table indicates the parameters which are enabled for reference and write by the setting of
parameter No.PA19. Operation can be performed for the parameters marked
Parameter No.
Setting operation
PA19 setting
Reference
0000h
Write
Reference
000Bh
Write
Reference
000Ch
Write
000Fh Reference
(initial value)
Write
Reference
100Bh
Write
Reference
100Ch
Write
Parameter
Name
POINT
This parameter is made valid when power is switched off, then on after
setting, or when the controller reset has been performed.
Basic setting
parameters
No.PA
Parameter No.
PA19 only
Parameter No.
PA19 only
Gain/Filter Extension setting
parameters parameters
No.PB No.PC
5 - 3
Initial value Unit Setting range
000Fh Refer to the text.
.
Extension
I/O setting
control
parameters
parameters
No.PD
No.PE