Sealed Burner Care And Cleaning; Place Grates And Burner Caps - Amana rs2310004-aro3100 Service

Sealed Burner Care and Cleaning

Place Grates and Burner Caps

A
B
C
A—Burner grate
B—Burner cap
C—Burner base
To verify burner caps are properly aligned and leveled,
move burner cap around on burner base. Pegs on the
burner base fit into a recess area on the underside of
the burner cap. Burner cap must be correctly placed on
burner base for proper operation of burner.
Verify proper burner cap is located on each burner base.
Burner does not burn properly if wrong size burner cap
is placed on burner base.
Turn on burners to check for proper operation.
RS2310004 Rev. 1
Not centered
36
Correct
Too small Too large