Table of Contents
Advertisement
Open Burner Care and Cleaning
Removing Rangetop and Grates
Remove rangetop and burner grates for cleaning under
rangetop. Lift up Rangetop to remove. A peg on each
side of rangetop snaps in side of range.
Removing Surface Burners
Clean surface burners frequently to ensure proper
burner ignition. Cleaning is especially important after
large spills. The surface burners can be removed for
easy cleaning.
1. Remove shipping screws if they have not been
removed during installation.
Shipping Screws
2. Tilt burner and lift out of range.
3. Reverse procedure to reinstall.
• Orifice must be in venturi as illustrated below.
• Shipping screws should be left off after range is
installed.
33
Orifice
Venturi
RS2310004 Rev. 1
Advertisement
Table of Contents
