Table of Contents
Advertisement
Installation Instructions Open Burner
A
A—Orifice Hood
B—Air Shutter
3. Pull all 4 air shutters fully open.
Converting Oven Burner for Use with LP\Propane
1. Open broiler door and remove broiler rack, pan, and
grid.
2. Through rectangular hole on rear of broiler cavity,
turn orifice hood (tighten), clockwise when facing
front of range, 1½ to 2 turns or until snug.
• Do not overtighten orifice hoods. Orifice hoods
can strip.
Open
Fully
A—Air Shutter Screw
B—Orifice Hood
C—Air Shutter
3. Open air shutter fully.
Converting Oven Thermostat for Use with
LP\Propane
1. Remove all (5) control knobs from range.
• Exposes 2 screws on burner control panel.
2. Remove 2 screws from burner control panel.
• Panel drops slightly after screws are removed.
3. Grasp bottom of burner control panel, gently lift and
pull out panel until clear of burner valve stems.
• After burner control panel clears valve stems,
continue to roll panel until free from range. Set
aside.
RS2310004 Rev. 1
Open Fully
B
C
A
B
A
D
A—Burner Control Knob
B—Pivot Point
C—Burner Control Panel
D—Screw
4. Turn the selector screw on oven thermostat so the
pointer is towards "LP".
5. Reverse steps 1–3 to replace control panel and
knobs.
Selector Screw
14
B
C
N
LP
LP
N
OFF
OFF
LP
N
OFF
Advertisement
Table of Contents
