Table of Contents
Advertisement
Automatic Detection
This function is used to change different modes, including Jumper-less, Automatic detect and PnP modes and
automatically configure the onboard Ethernet with available IRQ and I/O settings.
"Modify configuration" has to be selected.
Installing Network Driver
( Windows 95, Windows 98 or Windows NT)
1)
select Add new hardware.
2)
select net work card (adapter).
Recommended setup:
Manufacture
Model
3)
select Novell NE2000 compatible Driver.
4)
restart Windows 95, Windows 98 or Windows NT.
(MS-DOS)
1)
Install IPX.COM and NETX.EXE. 2 files from Novell Server.
2)
Run IPX.COM and NETX.EXE to connect Server.
: Novell/Anthem
: NE2000 compatible
— 27 —
To modify these settings, the
Advertisement
Chapters
Table of Contents
