Casio MP-2000 Service Manual page 18

Setup
The AMI BIOS Setup options described in this section are selected by choosing the appropriate high-level icon
from the AMI BIOS Setup main menu selection screen. Default setting for the QT-7100 is described in < > next to
each option. ( i.e. <AUTO> )
[Standard CMOS Setup]
When entering this item, the following screen will be shown;
Date, Day and Time Configuration
Select the Standard option. Select the Date and Time icon. The current values for each category are displayed.
Enter new values through the keyboard.
Pri Master < AUTO >
Pri Slave < AUTO >
Select one of these hard disk drive icons to configure the drive named in the option. A scrollable screen that lists
all valid disk drive types is displayed. Select the correct type and press <Enter>. The AMIBIOS is able to detect
the IDE drive parameters automatically and report them on this screen. To enable this auto-detect function, just
select the drive type Auto .
Floppy Drive A < Not Installed >
Floppy Drive B < Not Installed >
Move the cursor to these fields via and select the floppy type. The settings are 360KB 5.25 inch, 1.2 MB 5.25
inch, 720KB 3.5 inch, 1.44 MB 3.5 inch, or 2.88 MB 3.5 inch.
— 17 —