Commissioning; Setup - ABB Aztec 600 User Manual

Aztec 600 aluminium, ammonia, color, iron, manganese, phosphate
Single- and multi-stream colorimetric analyzers

6.8 Commissioning

Note. Access to the Commissioning Level is prevented by an Internal Security Switch. The switch is, by default, set to 'Disabled'
and should be set to 'Enabled' only if the measurement parameter or number of streams is to be changed. For further information
on the function of the Internal Security Switch, refer to Section 6.1.4, page 28.
There is one tab in the Commissioning screen:

6.8.1 Setup

Fields
Instrument type
Streams Fitted
Serial Number
Mode of Operation
Clear NonVol
Dilution Point
IM/AZT6CR–EN Rev. J
Description
The parameter to be measured by the analyzer. The options are:

Aluminium Monitor

Ammonia Monitor

Iron Monitor

Manganese Monitor

Manganese LR Monitor

Phosphate Monitor

Colour Monitor
The number of streams to be measured by the analyzer; 1, 2 or 3.
The serial number of the analyzer.
Options are:

Normal Run Mode

Demonstration Mode

Test Mode
Select 'Yes' to clear the analyzer's non-volatile memory.
6 Configuration
41