Archive - ABB Aztec 600 User Manual

Aztec 600 aluminium, ammonia, color, iron, manganese, phosphate
Single- and multi-stream colorimetric analyzers

6.6.3 Archive

Used to configure the data that is to be recorded on the SD card – see Section 9, page 51.
When external archive media contains approximately 300 files, its read/write performance becomes too slow, archiving is stopped
automatically and the icon is displayed alternating with the
memory. Replace the SD card with an empty card to prevent loss of unarchived data.
Fields
Archive file format
Archive file enables
New file interval
Wrap
38
Description
channel data file enable.
At least one of these options must be selected for data to be archived automatically to an SD Card.
A dialog box is displayed showing the log files that are to be recorded:

Text format file containing the stream data.

Binary format file containing stream data.

Alarm event log file enable (*.e)

Audit log file enable (*.a)
Available only if 'Wrap' is set to 'Off' and text format is selected.
The interval that text format stream data files are created. Options are:

Off

Hourly

Daily

Monthly
If set to 'On', the oldest archived data on the SD card is deleted automatically when the SD card
approaches its maximum capacity.
If set to 'Off', archiving stops when the SD card is full. The analyzer continues to store data internally
– see Section 9, page 51. When an empty SD card is inserted, archiving continues from the point
that the last archive was made.
icon. In this condition, data continues to be recorded to internal
6 Configuration
IM/AZT6CR–EN Rev. J