Alarm Event Log - Icons; Status Icons - ABB Aztec 600 User Manual

Aztec 600 aluminium, ammonia, color, iron, manganese, phosphate
Single- and multi-stream colorimetric analyzers
12.3.2 Alarm Event Log – Icons
Note.

A red alarm icon indicates an active and
flashing
unacknowledged alarm.

A red alarm icon indicates an active and
continuous
acknowledged alarm.
Icon Event
High process alarm – active/inactive
Low process alarm – active/inactive
High latch alarm – active/inactive
Low latch alarm – active/inactive
High annunciate alarm – active/inactive
Low annunciate alarm – active/inactive
Clean-in-progress alarm – active/inactive
In sample alarm
Out of sample alarm
Daylight saving start/end changed
Alarm acknowledged
Operator message
62
12 Diagnostic Information and Icons

12.3.3 Status Icons

Note. Status icons are displayed in the Status Bar – see
Fig. 2.1, page 8.
Icon Event
Historical review active
External archive media on-line with % used
indication
External archive media off-line with % used
indication
External archive media not inserted
(yellow flashing exclamation mark)
Media update in progress. Do not remove media
while this symbol is displayed
External media 100% full, archiving stopped
(green/grey icon, flashing white cross)
Warning! Too many files (green icon – media
online, grey icon – media offline)
IM/AZT6CR–EN Rev. J