Diagnostics; Monitor Status; Status; See Section 10 - ABB Aztec 600 User Manual

Aztec 600 aluminium, ammonia, color, iron, manganese, phosphate
Single- and multi-stream colorimetric analyzers

10 Diagnostics

Note. The 'Diagnostics' menu can be accessed only from the 'Indicator View' screen.
Fig. 10.1 User Diagnostic Screens

10.1 Monitor Status

There are five tabs in the Monitor Status screen:

10.1.1 Status

Fields
Current State
Current Step
Measurement Complete
Sample Concentration
Detector mV
LED Current
Dilution Ratio(s)
Cell Temperature
52
Description
Displays the current state of the analyzer (for example, Measuring, calibrating, off).
An indication of what the analyzer is doing in 'real time'.
A 'real-time' indication of measurement cycle progress
The current estimated concentration, derived from the raw detector signal. This is displayed only after
the addition of all reagents.
The raw signal from the analyzer detector (0 to 4095 mV).
Displays the current of the LED.
The current dilution ratio applied to each of the measurement streams.
The current recorded cell temperature.
see Section 10.1, page 52
see Section 10.2, page 54
see Section 10.3, page 54
see Section 10.4, page 54
10 Diagnostics
IM/AZT6CR–EN Rev. J