Second Step: Invoking An Instrument Command - Newport SMC100PP Manual

SMC100CC & SMC100PP
EDH0312En1010 – 10/11
Single-Axis Motion Controller/Driver for DC or Stepper Motor
4.3

Second step: Invoking an instrument command

Select the "Invoke Node" from the function panel:
User libraries > Instrument for NSTRUCT > Invoke Node
For SMC100:
User libraries > SMC100 for STRUCT > Invoke Node
It's possible to select the "Invoke Node" from Connectivity > .NET menu.
Link the 'Instrument Reference' output from LWInstrument_Connect to the 'reference'
input from the Invoke Node.
For SMC100: 'SMC100 Reference'. After the link, the Invoke Node header becomes
"SMC100".
8
NOTE