SMC100CC & SMC100PP
EDH0312En1010 – 10/11
Single-Axis Motion Controller/Driver for DC or Stepper Motor
4.4
Last step: Instrument disconnection
At the end of the LabVIEW program, the instrument is disconnected and its instance
must be closed.
So, right click to open the "functions" panel and choose the "User libraries" menu.
Next,
go
to
the
"Instrument
LWInstrument_Disconnect.vi.
For SMC100, the selected VI will be LWSMC100_Disconnect.vi from the "SMC100
for NSTRUCT" panel.
It is the last step of your program. At the end of your program, the instance of your
selected instrument will be deleted properly.
10
for
NSTRUCT"
menu
and
select
the