SMC100CC & SMC100PP
3.3
Menu contents for Newport instrument
LW SMC100_Connect
This VI creates an instance of the selected instrument. The instrument is registered to
the NSTRUCT server and the communication is ready.
Inputs
• Instrument Key: represents the instrument key from the NSTRUCT server. If it's
empty, a dialog box is displayed to purpose a device list. Then the user can selected
one instrument from this list.
• error in: describes LabVIEW error conditions that occur before this node runs.
Outputs
•
ConexPSD
• Component ID: the identifier of the instrument from the NSTRUCT server.
• Instrument Key: represents the instrument key from the NSTRUCT server.
• error out: contains LabVIEW error information.
LWSMC100_Disconnect
This VI is used to remove the instance of the selected instrument. The instrument is
unregistered from the NSTRUCT server and the communication is closed.
Inputs
SMC100
Reference:
•
• Component ID: the identifier of the instrument from the NSTRUCT server.
• error in: describes LabVIEW error conditions that occur before this node runs.
Outputs
• error out: contains LabVIEW error information.
Single-Axis Motion Controller/Driver for DC or Stepper Motor
Reference: represents the instrument instance.
represents the instrument instance.
5
EDH0312En1010 – 10/11