Motion detection here only has a relationship with the sensitivity and region setup. It has no
relationship with other setups.
4.10.4.1.2 Video Loss
In Figure 4-53, select video loss from the type list. You can see the interface is shown as in Figure
4-58. This function allows you to be informed when a video loss phenomenon occurrs. You can
enable an alarm output channel and then enable the show message function.
Tips:
You can enable preset/tour/pattern activation operation when video loss occurs.
Please refer to chapter 4.10.4.1.1 motion detection for detailed information.
Figure 4-56
Figure 4-57
80