Table of Contents
Advertisement
Please refer to the following sheet for detailed information.
Parameter
Enable
SMTP Server
Port
Anonymity
User Name
Password
Sender
Authentication
(Encryption
mode)
Subject
Attachment
Receiver
Interval
Figure 5-26
Function
Please check the box here to enable the email function.
Input the server address and then enable this function.
The default value is 25. You can modify it if necessary.
For the server that supports the anonymity function. You can
auto login anonymously. You do not need to input the user
name, password, and sender information.
The user name of the sender email account.
The password of the sender email account.
Sender email address.
You can select SSL or none.
Input email subject here.
The system can send out an email of a snapshot once you
check this box.
Input receiver email address here. A max of three addresses.
It supports SSL and TLS email addresses.
The send interval ranges from 0 to 3600 seconds. 0 means
there is no interval.
Please note system will not send out the email immediately
when the alarm occurs. When the alarm, motion detection, or
the abnormity event activates the email, the system sends out
the email according to the interval you specified here. This
function is very useful when there are too many emails
125
Advertisement
Table of Contents
