Amcrest General 720P(V2) Mini 1U Series User Manual page 104

4.10.6.1.2 Date and Time
The interface is shown as in Figure 4-77.

Date format: There are three types: YYYYY-MM-DD, MM-DD-YYYYY, or DD-MM-YYYY.

Date separator: There are three denotations to separate the date: dot, dash, and slash.

DST: Here you can set the DST time and date. Here you can set start time and end time by setting
corresponding week setup or by setting the corresponding date setup.

NTP: This is used to set the NTP server information.
4.10.6.1.3 Holiday
Holiday setup interface is shown as in Figure 4-78. Click the Add new holiday button and you can input
new holiday information. See Figure 4-79. Here you can set holiday name, repeat mode, and start/end
time.
Note

When you enable the Holiday settings and schedule setup at the same time, the holiday setting has
the priority. If the selected day is a holiday, then the system records as you set in holiday setting. If
it is not a holiday, the system records as you set in Schedule interface.

Please note: There is no year setup on the holiday setup. For example, if you set 30th Oct, 2012 as
a holiday, then the date of 30th Oct in each year will be set as a holiday.
Figure 4-77
95